With the Wonder Zip Zipper Threader, threading the slider onto a continuous zipper is child's play! How it works: Slide the Wonder Zip over the edge of a tabletop and insert the zipper/slider into the slot on the top. Thread both halves of the zipper into the zipper at the same time, forming an angle of approximately 90°. The zipper tape should face the tabletop. Pull the zipper evenly backwards. Done! With the Wonder Zip, you can thread zippers with a tape width of 4 mm as well as those with a width of 6.5 mm. With the 4 mm zippers, the zipper slides all the way into the narrow notch of the Wonder Zip. If you want to thread a zipper with a 6.5 mm zipper tape, it will only slide up to the notch. (See pictures!) Don't let this bother you. You can thread both zipper sizes very comfortably. Here you will find illustrated step-by-step instructions. The Wonder Zip is simply pushed over the tabletop thanks to its special holder. It is suitable for tabletops with a thickness of 1-4 cm. Since it is not mounted with a clamp, there is no damage to the table.
